Our product range includes a wide range of Solar Off Grid Power Plant, Solar On Grid Power Plant and Solar Roof Top Power Plant.

Solar Off Grid Power Plant

Solar power plant is based on the conversion of sunlight into electricity, either directly using photovoltaic (PV) and tracking systems to focus a large area of sunlight into a small beam. Photovoltaic converts light into electric current using the photoelectric effect. The term off-grid refers to not being connected to a grid, mainly used in terms of not being connected to the main or national electrical grid. In electricity, off-grid can be stand-alone systems (SHS) or mini-grids typically to provide a smaller community with electricity. Off-grid electrification is an approach to access electricity used in countries and areas with little access to electricity, due to scattered or distant population. In situations where grid parity has been reached, it becomes cheaper to generate one's own electricity rather than purchasing it from the grid.

Main Features

Load sharing between solar, Battery, Grid, Wind & DG.

100 % Utilization of solar power using Power sharing MPPT Converter and solar PCU.

Industrial Grade IGBT inverter with complete Galvanic Isolation (Three phase output –Three phase single Delta Star Transformer)

High Efficiency Temperature compensated flat cum boost charger for extended battery life.

Parallel operation for Solar, Battery and Grid.

Load side Reactive power compensation Ensures Additional output load can be used.

Solar PCU module utilizes the entire power available from solar and in the event of short-fall in power availability from solar the mains power is drawn to compensate the deficit of power.

Power sharing in PCU for catering to the load can be configured as per our requirement. Example Solar primary source and secondary for grid third for Battery.

Green & Reliable:

Optimized and Low maintenance system

Provide stable and reliable power increases overall efficiency of electronic components.

Export quality modules warranted for 25 Years

True MPPT (maximum power point tracking) charge controller to efficiently convert the power generated at module level.

Smart electronics to effectively manage usage of solar power based on load requirements.

High efficiency inverters capable of supplying load directly (in the day time) without storing in the batteries all the time.

Tubular/SMF/VRLA deep discharge batteries designed for longer life

Salient Features of Off-Grid Solar Power Plants

1 KWp Off-grid Solar Power Plant can generate approximately 4-5 units in normal sunny day.

Space required for installation of 1 KWp system is approximately 100 sq ft/KWp

Smart electronics to effectively manage usage of solar power based on load requirements. High efficiency inverters capable of supplying load directly (in the day time) without storing in the batteries all the time.

Off-grid Solar Power Plant can reduce CO2 emission by tons per year.

Solar On Grid Power Plant

In on-grid connected solar photo-voltaic (PV) systems, solar energy is fed into the building loads that are connected to the grid through a service connection with surplus energy being fed into the grid and shortfall being drawn from the grid. Production of surplus energy may happen when solar energy produced exceeds the energy consumption of the building. This surplus is fed into the grid. During the night, or when during the day energy demand in the building exceeds solar energy generation, energy is drawn from the grid. Grid-connected solar PV systems have no battery storage and will not work during grid outage. For buildings with grid-connected solar PV systems, the service connection meter needs to be of the bidirectional type which is known as net metering system, whereby import kWh and export kWh are separately recorded.


Net metering is a special metering and billing agreement between utilities and their customers, which facilitates the connection of small, renewable energy-generating systems to the power grid. Net metering allows residential and commercial customers who generate their own electricity from solar power to feed the excess energy back into the grid.

Main Components of Solar Power Plant:

Solar PV Modules

Supporting Structure

Solar Grid Inverter

Being a Member of Green Country:

Our country has become dependent on fossil fuels to generate electricity. This dependency has caused us great difficulties over the years and will continue to do so in the years to come if we do not change our ways. Be part of the solution. By installing a solar power system you will be doing your part to reduce the stranglehold fossil fuels have on our country. Let make Evolution and choose AquaSun Solar Solutions.

Solar Roof Top Power Plant

AquaSun Solar Solutions provides the most comprehensive portfolio of products, systems, solutions and services along the solar PV value chain that enable the generation, transmission and distribution of solar power for grid-connected and microgrid applications. Our offering includes inverters, low-voltage products, monitoring and control systems, grid connection, stabilization and integration products, as well as complete electrical balance of plant solutions. STS also offers a wide range of support and maintenance services, including remote operations and diagnostics, helping ensure solar installations deliver optimal performance.

Solar Plant Applicable on.

Cement Sheet Roof

Galvalume Sheet

Rcc Flooring

Components we use:

Solar PV Module We have our own manufacturing facility of solar PV module and we use Solar PV module Having more than 16.5% Efficiency in Industrial Solar Power Plant

Solar Grid Tied Inverter We are using reputed make solar inverter which have maximum efficiency and output

Supporting Struchure
GI/ Aluminium
Depends upone rooftop type